Re: [EnergyPlus_Support] Re: Calculated load different from component sizing summery

[Jeremiah Crossett <jcrossett@xxxxxxxxxxxxxxx>]

Jason, Thanks for your input it was very helpful.

YI, thanks for your response- however  Apparently did not read the post or look at the tables because the values you sent have nothing to do with the discrepancy between the

Maximum total cooling capacity" and the "calculated design load"  The values in question are highlighted in yellow and make up a rather large discrepancy is not from a sizing multiplier.

The questionable values are 

• Calculated Design Load [W]= 792.83
• Maximum Total Cooling Capacity [W]=  1007.43 
• Delta [W] = 214

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___