| Calculated Design Load [W] | User Design Load [W] | Calculated Design Air Flow [m3/s] | User Design Air Flow [m3/s] | Design Day Name | Date/Time Of Peak | Temperature at Peak [C] | Humidity Ratio at Peak [kgWater/kgAir] | |
| BLOCK1:ZONE1 | 792.83 | 792.83 | 0.059 | 0.059 | LOS ANGELES INTL ARPT ANN CLG 1% CONDNS DB=>MWB | 8/21 16:32:00 | 26.28 | 0.00955 |
Jeremiah D. Crossett | Senior Analyst | Phase Change Energy Solutions
120 E. Pritchard St. | Asheboro, NC 27203 | Mobile 503-688-8951
On Fri, Sep 14, 2012 at 1:49 PM, Jeremiah Crossett <jcrossett@xxxxxxxxxxxxxxx> wrote:
Jason, Thanks for your input it was very helpful.YI, thanks for your response- however Apparently did not read the post or look at the tables because the values you sent have nothing to do with the discrepancy between theMaximum total cooling capacity" and the "calculated design load" The values in question are highlighted in yellow and make up a rather large discrepancy is not from a sizing multiplier.The questionable values are
- Calculated Design Load [W]= 792.83
- Maximum Total Cooling Capacity [W]= 1007.43
- Delta [W] = 214