[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Can GenOpt 3.1 be coupled to EnergyPLUS 7.2?
thank you for the reply. I must say that only few days ago, I downloaded jEplus (saw it in some article, probably yours) and tried to do some simple examples, just to take a grip on it. I must say that it looks excellent. I saw that you have version coupled with GA, and I will try to work some example later. I posted this message because I would like to learn GenOPT for my ongoing research.
Looking forward for hearing you again (probably through jEplus support website).
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Ivan Korolija <ivankorolija@...> wrote:
> Hi Marko,
> If you find itÂ difficultÂ to couple GenOpt with E+ you might want to try jEPlus+EA (http://www.iesd.dmu.ac.uk/~jeplus/wiki/doku.php?id=docs:jeplus_ea)
> From: marko.ignjatovic1980 <marko.ignjatovic1980@...>
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> Sent: Sunday, February 24, 2013 9:58 AM
> Subject: [EnergyPlus_Support] Can GenOpt 3.1 be coupled to EnergyPLUS 7.2?
> Hi all,
> I am trying to figure out how can genopt 3.1 be coupled to energyplus 7.2. I suppose cfg file should be modified, but i am not sure how and if should it be done. I am not a programmer, so any reply will help.
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
The group web site is:
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to: