I´m working on a data center simulation and due to the high colling load (1MW) on a small area (560m²) I have a lot of warnings. The simulation is running, but I´m trying to reduce the number of wanings.
************ ** Warning ** Plant loop exceeding upper temperature limit,
PlantLoop="CHILLED WATER LOOP"
************* ** ~~~ ** This error occurred 537739 total times;
************* ** ~~~ ** during Warmup 7255 times;
************* ** ~~~ ** during Sizing 0 times.
************* ** ~~~ ** Max=140.281491
*************
************* ** Warning ** Temperature out of range [-100. to 200.] (PsyPsatFnTemp)
************* ** ~~~ ** This error occurred 4978717 total times;
************* ** ~~~ ** during Warmup 0 times;
************* ** ~~~ ** during Sizing 0 times.
************* ** ~~~ ** Max=462.436949 C Min=442.956365 C
*************
************* ** Warning ** GetSpecificHeatGlycol: Temperature out of range (too high) for fluid specific heat
************* ** ~~~ ** This error occurred 32126400 total times;
************* ** ~~~ ** during Warmup 0 times;
************* ** ~~~ ** during Sizing 0 times.
************* ** ~~~ ** Max=380.57589 {C} Min=125. {C}
*************
************* ** Warning ** GetDensityGlycol: Temperature out of range (too high) for fluid density
************* ** ~~~ ** This error occurred 6452375 total times;
************* ** ~~~ ** during Warmup 0 times;
************* ** ~~~ ** during Sizing 0 times.
I appreciate if you help me with some tips.
Thanks,
Diego.