[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: EnergyPlus Zone temperature sensor Fault modeling



Xiwang,

We are developing new features for EnergyPlus to model faults. Call me (510) 486-7082 for a discussion.

Tianzhen

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "xiwang0620" <xiwangli2010@...> wrote:
>
> Hi, all,
> 
> I want to simulate zone temperature sensor fault (offset/noise). I added a 
> EnergyManagementSystem:Sensor,
> ZoneT_Sensor, !- Name
> SPACE1-1 !- Output:Variable or Output:Meter Index Key Name
> Zone/Sys Air Temperature  !- Output:Variable or Output:Meter Name
> 
> And then I created a EMS program and a actuator for this Temperature sensor.
> 
> EnergyManagementSystem:Program,
> ZoneT_Sensor_fault, !- Name
> SET ZoneT_Actuator = ZoneT_Sensor + noise; !- Program Line 1
> 
> EnergyManagementSystem:Actuator,
> ZoneT_Actuator,
> SPACE1-1,
> Air Temperature,
> Zone air Temperature;
> 
> It's looks reasonable to me. However, the model will terminate with a fatal error.
> 
> Anybody did similar work before. Any suggestions and solutions?
> 
> Thanks very much.
> 
> Xiwang Li
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/