[EnergyPlus_Support] Re: How to integrate the simulation model with the real data

[Mário <mneves32@xxxxxxxxx>]

Hello,

have you seen:Building Controls Virtual Test Bed

http://www.ibpsa.us/pub/simbuild2010/invitedPresentations/SB10-PPT-IS08C-02-Wetter.pdf

MN

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Yan, Ying" <yiy11005@...> wrote:
>
> Hello everyone,
> 
> I built a simulation model of a building.  Now we obtained several real data from sensors installed in the building such as the temperature, the humidity ratio, and etc. I want to replace part of the simulation model by these real data which means the hybrid simulation model with real data will get closer to the real building.  My question is whether I can replace part of the simulation model by real data.  For instance, I knew the real data of the mixed air temperature of the AHU and the discharge air temperature of the AHU. How can I force these two variables to be the real data in my simulation model? Thank you for giving me some suggestions!
> 
> ----------------------------------------
> Best Regards
> 
> Ying Yan
> 
> Graduate Student
> Electrical & Computer Engineering
> School of Engineering
> University of Connecticut
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/