I'm doing some diagnostic simulations comparing EnergyPlus to another program (not DOE-2 :-)), and need to extract hourly variables for zone air temperature, inside surface temperature and heat fluxes through an interior wall. I took some old IDFs from 6 years ago, ran them through the IDFVersionUpdater to get Version 8.0 IDFs, and used the resultant reporting for the zone air temperature, but I'm not getting anything in the output *.eso. Output:Variable,*,Site Outdoor Air Drybulb Temperature,Monthly; < this works Output:Variable,*,Zone/Sys Air Temp,Hourly; < this does not work Output:Variable,*,Zone Air System Sensible Cooling Rate,Monthly; < this works Output:Variable,*,Zone Air System Sensible Heating Rate,Monthly; < this does not work Also, what is the syntax for specifying the heat flux for a particular surface ? I tried this but it doesn't work: Output:Variable, *, !- Key_Value HOUSE:AT-FLOOR2 Heat Flow, !- Variable_Name Hourly; !- Reporting_Frequency Thanks Joe Huang White Box Technologies, Inc. 346 Rheem Blvd., Suite 108D Moraga CA 94556 yjhuang@xxxxxxxxxxxxxxxxxxxxxxxx http://weather.whiteboxtechnologies.com for simulation-ready weather data (o) (925)388-0265 (c) (510)928-2683 "building energy simulations at your fingertips" __._,_.___ Primary EnergyPlus support is found at: http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/ Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files. EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe __,_._,___ |