[EnergyPlus_Support] Problem with External Interface (FMUImpo [2 Attachments]

[Jens Wurm <wurm.jens@xxxxxxxxxxxxxx>]

Hi all,

I have a problem with the external interface of energy plus to couple a FMU to an energy plus model.

I get the following error message, if I want to simulate both:

   ** Severe  ** ExternalInterface: Simulation model has no variable "SITE OUTDOOR AIR WETBULB TEMPERATURE" with key "ENVIROMENT".
   **  Fatal  ** ExternalInterface/StopExternalInterfaceIfError: Error in ExternalInterface:Check EnergyPlus *.err file.

I have a output variable with the name Site Outdoor Air WetBulb Temperature and the key Enviroment.

I attach the idf file and the fmu.

Has someone an idea, where the problem lay?

I use energy plus 8.0.0.008.

--
Best regards

Jens Wurm

__._,_.___

  	View attachments on the web
  







Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Attachment not found:
d:\eudora\attach\test_model.fmu

Attachment not found:
d:\eudora\attach\room51_fancoils.idf