[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] E+ error - maximum Z height
If you search this forum, I believe you will find the most
likely answer -- a surface with a very small area -- maybe even one that
has been reduced in coordinates due to the coordinates being to
close.
Typically, if that surfaces is removed from the input file, the
simulation will run.
(I would have provided the answer to the previous problem -- if that
helps).
At 07:36 PM 11/16/2014, Vinay Devanathan vinay.devanathan@xxxxxxxxx
[EnergyPlus_Support wrote:
I have been encountering this
error with one of my models -Â
  ** Severe  ** SetOutBulbTempAt: Surface Outdoor Temperatures
< -100 C
  **  ~~~  ** ...check Surface Heights - Maximum
Surface Height=[20941].
It is a fairly large model with around 2,200 surfaces and I tried looking
at the Z coordinate values for the surfaces by sampling and do not see
anything off as yet.
Has anyone else encountered this error previously? Please let me know
about it.
Thanks
__._,_.___
Posted by: Linda Lawrie <linda@xxxxxxxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___