On Mon, Nov 17, 2014 at 9:26 AM, Linda Lawrie linda@xxxxxxxxxxxxxx [EnergyPlus_Support] <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
ÂIf you search this forum, I believe you will find the most likely answer -- a surface with a very small area -- maybe even one that has been reduced in coordinates due to the coordinates being to close.
Typically, if that surfaces is removed from the input file, the simulation will run.
(I would have provided the answer to the previous problem -- if that helps).
At 07:36 PM 11/16/2014, Vinay Devanathan vinay.devanathan@xxxxxxxxx [EnergyPlus_Support wrote:
I have been encountering this error with one of my models -Ã?
� � ** Severe � ** SetOutBulbTempAt: Surface Outdoor Temperatures < -100 C
� � ** � ~~~ � ** ...check Surface Heights - Maximum Surface Height=[20941].
It is a fairly large model with around 2,200 surfaces and I tried looking at the Z coordinate values for the surfaces by sampling and do not see anything off as yet.
Has anyone else encountered this error previously? Please let me know about it.
Thanks
--Vinay Dev
__._,_.___
Posted by: Vinay Devanathan <vinay.devanathan@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.