On 15.04.2015, at 21:05, "harshul263@xxxxxxxxxxx [EnergyPlus_Support]" <EnergyPlus_Support@xxxxxxxxxxxxxxx> wrote:
Hello everyone,
I am working on this experimental work where I am doing energy model for this greenhouse. Please find attachment for the greenhouse section. The height of this greenhouse is 30Feet with two different Temperature/RH (humidity) conditions for different plantations at top & bottom region. Top 15 feet has 75F/80%RH while bottom part has 65F/90%RH. There is no separation between these two "virtual zones". Also, there is a water body too at the bottom (aquaponics) that will add humidity in the space too.
Does someone have experience with such kind of modeling where we need to give different temp/RH in different part of space. I know E+ can do temperature gradient (which I don't know how to use) but what about stratification in the space? How can it be controlled? How waterbody can be modeled in the space?
Thanks a lot in advance
Harshul Singhal, LEED AP BD+C
<Greenhouse.pdf>
__._,_.___
Posted by: "jeannieboef@xxxxxxxxx" <jeannieboef@xxxxxxxxx>
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
__,_._,___