[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Capacity Limit
Dear E+ User
I would like to limit the cooling and heating capacity of a system. On
the one hand, applying an electric baseboard heater, the nominal
capacity can be limited. On the other hand, in the case of a DX cooling
coil, the rated capacity refers to design conditions but the effective
capacity at a time step (output variable) can be beyond the rated one,
as Ned and Don already mentioned in an earlier mail. What system allows
specifying a cooling capacity limit that cannot be exceeded in the
simulation run?
I am looking forward to your response.
Alexander
_______________________________________
DI (FH) Alexander Beisteiner
Wissenschaftlicher Mitarbeiter
Forschungs- und Technologietransfer Pinkafeld GmbH
Steinamangerstraße 21
A - 7423 Pinkafeld
Tel.: +43-3357-45370 DW 1324
Fax.: +433357-45370 DW 1010
[Non-text portions of this message have been removed]
------------------------ Yahoo! Groups Sponsor ---------------------~-->
Get 128 Bit SSL Encryption!
http://us.click.yahoo.com/LIgTpC/vN2EAA/xGHJAA/dkFolB/TM
---------------------------------------------------------------------~->
To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/