[EnergyPlus_Support] Re: Room is cooled (to setpoint) obviously but report gives cooling = 0

["waspoorboy" <mingsbox@xxxxxxxxxxxxxx>]

idf uploaded to [Files]>[Problem_Submittals]>VAVplant_no_flow.zip 
A node diagram is also included.

err file checked, no connection errors, no orphan branches.
Thanks for the help.
Ming

> Please upload or send your idf file (zipped, to energyplus-
> support@g...).  The max iteration errors indicate that there is 
> an error in the connections in your system or invalid control 
> settings.  Check the err file. Are there any node connection errors 
> or orphan branches?  
> 
> The zone/sys sensible cooling rate should be different from the 
> sensible water cooling rate.  The first one is the net cooling 
> delivered to the zone.  The second is the gross cooling load on the 
> coil and will include ventilation loads and fan heat load.   
> 
> Mike



------------------------ Yahoo! Groups Sponsor ---------------------~-->
Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
http://www.c1tracking.com/l.asp?cid=5511
http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/dkFolB/TM
---------------------------------------------------------------------~->

To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are not allowed -- please post any files to the appropriate folder in the Files are of the Support Web Site.




 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/