[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Downloading Version 1.2.1
I'm uploading my file, it runs with v 1.2.1 when I ran it with 1.2.2
I get the error message below although I transitioned the file.
Any help would be more than apreciated.
Andrea.
> > ** Severe ** Inlet parameters for plant demand side splitter are
> not
> > physically possible **
> > ** Problem in input for plant demand side HOT WATER LOOP **
> > ** The maximum flow out of the splitter is less than the minimum
> inlet
> > flow **
> > ** Flow rate inputs for the loop do not match flow requirements of
> the
> > various branches/components **
> > ** Check your flow rates and make sure that flow balances between
> the
> > splitter inlet and outlets
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Drury.Crawley@e... wrote:
>
> The problem may be still in your input files. Version 1.2.1 just
> didn't give you a warning. We've added more warnings
> and notices of potential problems in V 1.2.2.
>
>
>
>
> "ingdallolio"
> <ing.dallolio@l... To:
EnergyPlus_Support@xxxxxxxxxxxxxxx
> >
cc:
> Sent by: Subject:
[EnergyPlus_Support] Re: Downloading
> EnergyPlus_Support@yaho Version
1.2.1
>
ogroups.com
>
>
> 06/04/2005 09:26
AM
> Please respond
to
>
EnergyPlus_Support
>
>
>
>
>
>
> Drury,
> Do you mean that the problem is in our input files and they have to
> be corrected in order to run with v.1.2.2 or you mean there is a
> problem with v 1.2.2 ?
> Thanks.
> Andrea.
>
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Drury.Crawley@e... wrote:
> >
> > You should uninstall v 1.2.2 and reinstall 1.2.1.
> > Contact me directly if you didn't keep a copy
> > of 1.2.1 and we'll arrange a place for you to
> > download.
> >
> > But it sounds as if the problems were still in
> > 1.2.1 just not noted by E+.
> >
> >
> >
> >
>
> > "colotupper"
>
> > <tupper@c...> To:
> EnergyPlus_Support@xxxxxxxxxxxxxxx
> > Sent by:
> cc:
> > EnergyPlus_Support@yaho Subject:
> [EnergyPlus_Support] Downloading Version
> > ogroups.com
> 1.2.1
> >
>
> >
>
> > 05/27/2005 11:56
> AM
> > Please respond
> to
> >
> EnergyPlus_Support
>
> >
>
> >
>
> >
>
> >
> >
> >
> > Does anyonoe know if there's a way to reinstall Version 1.2.1
after
> > installing V1.2.2?
> >
> > None of my files work with the new version, and I need to run them
> to
> > produce a report that's due at the end of next week.
> >
> > I ran the transition program and manually fixed many errors, but
any
> > files with Hot Water Loops generate the following error.
> >
> > ** Severe ** Inlet parameters for plant demand side splitter are
> not
> > physically possible **
> > ** Problem in input for plant demand side HOT WATER LOOP **
> > ** The maximum flow out of the splitter is less than the minimum
> inlet
> > flow **
> > ** Flow rate inputs for the loop do not match flow requirements of
> the
> > various branches/components **
> > ** Check your flow rates and make sure that flow balances between
> the
> > splitter inlet and outlets
> >
> > None of my flow rates are being autosize, and I have made sure all
> the
> > inlet flows equal the outlet flows. Has anyone else had this
> problem
> > with the new version? I read some other messages about this same
> > error, but the folks were able to fix it using V1.2.1 - my files
all
> > ran fine with the older version, so if anyone knows where to get
the
> > old version, I would appreciate it!
> >
> >
> >
> >
> > The primary EnergyPlus web site is found at:
> > http://www.energyplus.gov
> >
> > The group web site is:
> > http://groups.yahoo.com/group/EnergyPlus_Support/
> >
> > Attachments are not allowed -- please post any files to the
> appropriate
> > folder in the Files area of the Support Web Site.
> >
> >
> >
> > Yahoo! Groups Links
> > To visit your group on the web, go to:
> > http://groups.yahoo.com/group/EnergyPlus_Support/
> >
> > To unsubscribe from this group, send an email to:
> > EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
> >
> > Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
>
>
>
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> Attachments are not allowed -- please post any files to the
appropriate
> folder in the Files area of the Support Web Site.
>
>
>
> Yahoo! Groups Links
> To visit your group on the web, go to:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> To unsubscribe from this group, send an email to:
> EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are not allowed -- please post any files to the appropriate folder in the Files area of the Support Web Site.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/