Just to add that the expIDF is generated before simulation.
If the templates are not selected or entered correctly, the expIDF will be generated incorrectly and the simulation may not be sucessful.
You will need more than one template to work together to complete your simple system in Iran.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: t.t111ir@xxxxxxxxx
Date: Fri, 20 Jan 2012 19:21:22 +0000
Subject: Re: [EnergyPlus_Support] Re: HVAC template
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
If the templates are not selected or entered correctly, the expIDF will be generated incorrectly and the simulation may not be sucessful.
You will need more than one template to work together to complete your simple system in Iran.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: t.t111ir@xxxxxxxxx
Date: Fri, 20 Jan 2012 19:21:22 +0000
Subject: Re: [EnergyPlus_Support] Re: HVAC template
thank you very much
From: Nacho Gomis <nachogo27@xxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Friday, January 20, 2012 10:46 PM
Subject: [EnergyPlus_Support] Re: HVAC template
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Friday, January 20, 2012 10:46 PM
Subject: [EnergyPlus_Support] Re: HVAC template
Yes,you are right.
You use the template which is easier to set up.You have to fill less fields.
When you run the simulation EnergyPlus "expand" your templates and
create the objects that are needed for your HVAC. You will not have to
define the inlet/outlet node because EnergyPlus will do itself.
You will have after the simulation a new file on your folder
"Example.expidf" which is your idf after being processed and expanded
by EnergyPlus. You can rename it to "Example_exp.idf" and you will
have the idf file with all your objects created. You will have all
your nodes too.
I hope it helps you,
Ignacio Gomis
You use the template which is easier to set up.You have to fill less fields.
When you run the simulation EnergyPlus "expand" your templates and
create the objects that are needed for your HVAC. You will not have to
define the inlet/outlet node because EnergyPlus will do itself.
You will have after the simulation a new file on your folder
"Example.expidf" which is your idf after being processed and expanded
by EnergyPlus. You can rename it to "Example_exp.idf" and you will
have the idf file with all your objects created. You will have all
your nodes too.
I hope it helps you,
Ignacio Gomis
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___