Ery,
I will give you the exact number of zones and my computer spec tomorrow when I go back to my office, I have a work in progress on my laptop that is probably 2/3 of the full model (please see the snapshot attached ) and it has 346 zones.
Vladimir
On Thursday, December 12, 2013 5:51 PM, Ery Djunaedy <ery.mailinglist@xxxxxxxxx> wrote:
Vladimir,
How many zones are there in this model? What kind of computer is required to work with a model that big? Our mileage with OpenStudio is maxed at around 400 zones before SketchUp and/or OpenStudio starts to be very very slow.
Ery
On 12/12/2013 02:20 PM, Vladimir Bajic wrote:
How many zones are there in this model? What kind of computer is required to work with a model that big? Our mileage with OpenStudio is maxed at around 400 zones before SketchUp and/or OpenStudio starts to be very very slow.
Ery
On 12/12/2013 02:20 PM, Vladimir Bajic wrote:
I couldn't resist not to write a few lines after reading Karen's email, especially the line where she says "... and Simergy and N+++ were whispered rumors".
N++ is official now and has many features that I would like to share with this group including some that were mentioned in the "light weight GUI for HVAC systems" part of discussion ...A good opportunity to find out more about what is that you can do with N++ is to attend the on line demo next Thursday. If you would like to register, please go to
In a mean while, I would like to share a 3D view snapshot from one of mine current projects that was done in N++.
Best,
VladimirExpertApp
On Thursday, December 12, 2013 3:47 PM, Jeremiah Crossett <jcrossett@xxxxxxxxxxxxxxx> wrote:
Agreed.
Jeremiah D. Crossett | Senior Analyst | Phase Change Energy Solutions120 E. Pritchard St. | Asheboro, NC 27203| Mobile 503-688-8951
On Thu, Dec 12, 2013 at 12:45 PM, Jim Dirkes <jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
If she shares, you aren't allowed to ask for documentation, complain about any problems or ask many questions :)
James V Dirkes II, PE, BEMP, LEED AP
www.buildingperformanceteam.com
Energy Analysis, Commissioning & Training Services
1631 Acacia Drive, Grand Rapids, MI 49504 USA
616 450 8653
-----Original Message-----
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Ery Djunaedy
Sent: Thursday, December 12, 2013 3:43 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Re: Quick path to learn HVAC detailed modeling approach, is there an
Karen, I would like to give it a try if you are willing to share.
On 12/12/2013 12:25 PM, Karen Walkerman wrote:
>
> I started creating this when openstudio was still a buggy SketchUp
> geometry plug-in, DesignBuilder was expensive and clumsy and Simergy
> and N+++ were whispered rumors. I have thought at times of sharing
> the software, but I am not sure what that would look like. I have
> spent too much time and effort to give it away, but once this
> discussion started, I couldn't not share.
>
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo Groups Links
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___