[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Can E+ model open loop ground heat exchanger? [1 Attachment]



Thanks again, Robin.

To illustrate what my concern would be, I attach a screenshot from E+ idf editor for your reference, which shows HeatPump:WaterToWater:EquationFit:Cooling object. 

It seems there is no way of setting inlet water temperature alone here. The temperature can be obtained from other connected object, such as a cooling tower, in relation to "Source Side Inlet Node" of this heat pump object. Am I right?

Sean



__._,_.___
View attachments on the web

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\E+ heat pump watertowater equationfit cooling.png