The I/O is inconsistent. It says,"DisplayAdvancedReportVariables" on pp. 27,152, 204, "DisplayAdvancedVariables" on p. 284, 1727, , "DisplayAdvancedReportVariable" on pp. 487, 513, etc.�� So, I went with what's in the Energy+.idd, i.e.,
���� Output:Diagnostics,DisplayAdvancedReportVariables;
However, I failed to get anything in the *.eso or *.csv files.�� The hourly report specification is written as:
���� Output:Variable,
�������� AT-FLOORM,������������������ !- Key_Value
�������� Surface Average Face Conduction Heat Gain Rate,�� !- Variable_Name
�������� Hourly;���������������������������������� !- Reporting_Frequency
Joe
Joe Huang White Box Technologies, Inc. 346 Rheem Blvd., Suite 108D Moraga CA 94556 yjhuang@xxxxxxxxxxxxxxxxxxxxxxxx http://weather.whiteboxtechnologies.com for simulation-ready weather data (o) (925)388-0265 (c) (510)928-2683 "building energy simulations at your fingertips"
On 30/09/2013 11:40 AM, Edwin Lee wrote:
I haven't verified, but a quick look in the I/O ref reveals this: ��Output:Diagnostics,DisplayAdvancedVariables;
On Mon, Sep 30, 2013 at 12:27 PM, Joe Huang <YJHuang@xxxxxxxxxxxxxxxxxxxxxxxx> wrote:
��Jeremiah,
I don't use the IDF editor.�� I just edit the IDF.�� I've tried adding the following to the IDF
�� Output:Diagnostics,
������ DisplayAdvancedReportVariables,
������ DisplayAdvancedReportVariables;
but it didn't work (assuming that I would see a larger *.rdd).�� Could you look into one of your IDFs where you've turned this mode on, and see how this command is written?
Thanks.
Joe
Joe Huang White Box Technologies, Inc. 346 Rheem Blvd., Suite 108D Moraga CA 94556 yjhuang@xxxxxxxxxxxxxxxxxxxxxxxx http://weather.whiteboxtechnologies.com for simulation-ready weather data (o) (925)388-0265 (c) (510)928-2683 "building energy simulations at your fingertips"
On 30/09/2013 11:14 AM, Jeremiah Crossett wrote:��Joe,You may have to turn on Key 1��DisplayAdvancedReportVariables in the output diagnostics object. (This object is the third from the bottom in IDF editor)
Descriptions of the outputs you are looking for can be found in the input output reference page 210-211 are likely to be one of the following: (bold highlight for the one I think you want)��Surface Inside Face Conduction Heat Transfer Rate [W]Surface Inside Face Conduction Heat Transfer Rate per Area [W/m2]Surface Inside Face Conduction Heat Gain Rate [W]Surface Inside Face Conduction Heat Loss Rate [W]Surface Outside Face Conduction Heat Transfer Rate [W]Surface Outside Face Conduction Heat Transfer Rate per Area [W/m2]Surface Outside Face Conduction Heat Gain Rate [W]Surface Outside Face Conduction Heat Loss Rate [W]Surface Average Face Conduction Heat Transfer Rate [W]Surface Average Face Conduction Heat Transfer Rate per Area [W/m2]Surface Average Face Conduction Heat Gain Rate [W]Surface Average Face Conduction Heat Loss Rate [W]Surface Average Face Conduction Heat Transfer Energy [J]Surface Heat Storage Rate [W]Surface Heat Storage Rate per Area [W/m2]Surface Heat Storage Gain Rate [W]Surface Heat Storage Loss Rate [W]Surface Heat Storage Energy [J]
--
Edwin Lee, PhDEngineer,��Commercial Buildings Research StaffNational Renewable Energy Laboratory
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___