[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [EnergyPlus_Support] Energy plus model calibration
Thanks Jim for your attached file, it helped me too...I'm sure that was a great presentation (Y).
I'm calibrating a model with DesignBuilder. and have a question !!
If it is hybrid apartment, I calibrated the conditioned and unconditioned zones separately,
For the unconditioned zone, I compared the real measured temperature with the output attempts from DesignBuilder, after changing in the uncertainty variables, and made them as less as possible.
then performed the stats. tests like MBE, RMSE, and correlation coefficient, to choose the near-to-actual curve from the measured temperature.
For the conditioned zone, I made the same actually, to compare between temperatures.
My questions are:
- is that right?
- what's the difference between the calibration of a conditioned and non-conditioned zones?
- If I have the actual energy use of the air-condition of that zone, should I compare it with the cooling loads of the modeled one?
Thanks for concern, and if you could send me also some reading materials or URLs, I appreciate.
Heba
__._,_.___
Posted by: hassan_kamel77@xxxxxxxxxxx
EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The EnergyPlus web site is found at:
http://www.energyplus.net/
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___